HVAC
/
PeripheralDriver_AutoChips_AC7840x
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
PeripheralDriver_AutoChips_.../inc_src/pdt_hw.h

395 lines
11 KiB
C
Raw Blame History

/* Copyright Statement:
*
* This software/firmware and related documentation ("AutoChips Software") are
* protected under relevant copyright laws. The information contained herein is
* confidential and proprietary to AutoChips Inc. and/or its licensors. Without
* the prior written permission of AutoChips inc. and/or its licensors, any
* reproduction, modification, use or disclosure of AutoChips Software, and
* information contained herein, in whole or in part, shall be strictly
* prohibited.
*
* AutoChips Inc. (C) 2021. All rights reserved.
*
* BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("AUTOCHIPS SOFTWARE")
* RECEIVED FROM AUTOCHIPS AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER
* ON AN "AS-IS" BASIS ONLY. AUTOCHIPS EXPRESSLY DISCLAIMS ANY AND ALL
* WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
* WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NONINFRINGEMENT. NEITHER DOES AUTOCHIPS PROVIDE ANY WARRANTY WHATSOEVER WITH
* RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY,
* INCORPORATED IN, OR SUPPLIED WITH THE AUTOCHIPS SOFTWARE, AND RECEIVER AGREES
* TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO.
* RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO
* OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN AUTOCHIPS
* SOFTWARE. AUTOCHIPS SHALL ALSO NOT BE RESPONSIBLE FOR ANY AUTOCHIPS SOFTWARE
* RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
* STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND AUTOCHIPS'S
* ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE AUTOCHIPS SOFTWARE
* RELEASED HEREUNDER WILL BE, AT AUTOCHIPS'S OPTION, TO REVISE OR REPLACE THE
* AUTOCHIPS SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE
* CHARGE PAID BY RECEIVER TO AUTOCHIPS FOR SUCH AUTOCHIPS SOFTWARE AT ISSUE.
*/
/*!
* @file pdt_hw.h
*
* @brief This file provides PDT hardware integration functions.
*
*/
/* PRQA S 4304 EOF */ /* Type conversion. */
#ifndef PDT_HW_H
#define PDT_HW_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* =========================================== Includes =========================================== */
#include "pdt_drv.h"
/* ============================================ Define ============================================ */
/* =========================================== Typedef ============================================ */
/* ========================================== Variables =========================================== */
/* ==================================== Functions declaration ===================================== */
/*!
* @brief Config PDT pulse out width and output enable.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] config: pointer to pulse out configuration structure
* @return none
*/
void PDT_ConfigPulseOut(PDT_Type * const base, const pdt_pulse_out_config_type_t *config);
/*!
* @brief Config PDT timer.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] config: pointer to timer configuration structure
* @return none
*/
void PDT_ConfigTimer(PDT_Type * const base, const pdt_timer_config_t *config);
/* ===================================== Functions definition ===================================== */
/*!
* @brief Set PDT multiplication factor for prescaler.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] mult: multiplication factor select for prescaler
* - PDT_CLK_PREMULT_FACT_AS_1
* - PDT_CLK_PREMULT_FACT_AS_10
* - PDT_CLK_PREMULT_FACT_AS_20
* - PDT_CLK_PREMULT_FACT_AS_40
* @return none
*/
static inline void PDT_SetMultForPrescaler(PDT_Type * const base, pdt_clk_prescaler_mult_factor_t mult)
{
MODIFY_REG32(base->SC, PDT_SC_MULT_Msk, PDT_SC_MULT_Pos, mult);
}
/*!
* @brief Set PDT clock prescaler.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] psc: prescaler divide
* - PDT_CLK_PREDIV_BY_1
* - PDT_CLK_PREDIV_BY_2
* - PDT_CLK_PREDIV_BY_4
* - PDT_CLK_PREDIV_BY_8
* - PDT_CLK_PREDIV_BY_16
* - PDT_CLK_PREDIV_BY_32
* - PDT_CLK_PREDIV_BY_64
* - PDT_CLK_PREDIV_BY_128
* @return none
*/
static inline void PDT_SetClockPrescaler(PDT_Type * const base, pdt_clock_prescaler_div_t psc)
{
MODIFY_REG32(base->SC, PDT_SC_PRE_Msk, PDT_SC_PRE_Pos, psc);
}
/*!
* @brief Set PDT count mode.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] state: continuous mode enable
* - true
* - false
* @return none
*/
static inline void PDT_SetCountMode(PDT_Type * const base, bool state)
{
MODIFY_REG32(base->SC, PDT_SC_CONT_Msk, PDT_SC_CONT_Pos, state);
}
/*!
* @brief Set PDT load values cmd.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @return none
*/
static inline void PDT_LoadValuesCmd(PDT_Type * const base)
{
MODIFY_REG32(base->SC, PDT_SC_LDOK_Msk, PDT_SC_LDOK_Pos, true);
}
/*!
* @brief Set PDT load mode.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] mode: PDT load mode
* - PDT_LOAD_VAL_IMMEDIATELY
* - PDT_LOAD_VAL_AT_MODULO_COUNTER
* - PDT_LOAD_VAL_AT_NEXT_TRIGGER
* - PDT_LOAD_VAL_AT_MODULO_COUNTER_OR_NEXT_TRIGGER
* @return none
*/
static inline void PDT_SetLoadMode(PDT_Type * const base, pdt_load_value_mode_t mode)
{
MODIFY_REG32(base->SC, PDT_SC_LDMOD_Msk, PDT_SC_LDMOD_Pos, mode);
}
/*!
* @brief Set PDT module interrupt enable.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] state: enabling state
* - true
* - false
* @return none
*/
static inline void PDT_SetInterruptEnable(PDT_Type * const base, bool state)
{
MODIFY_REG32(base->SC, PDT_SC_PDTIE_Msk, PDT_SC_PDTIE_Pos, state);
}
/*!
* @brief Get PDT timer interrupt flag.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @return PDT interrupt flag
*/
#define PDT_GetTimerIntFlag(base) (READ_BIT32((base)->SC, PDT_SC_PDTIF_Msk) >> PDT_SC_PDTIF_Pos)
/*!
* @brief Clear PDT timer interrupt flag.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @return none
*/
#define PDT_ClearTimerIntFlag(base) CLEAR_BIT32((base)->SC, PDT_SC_PDTIF_Msk)
/*!
* @brief PDT Enable.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @return none
*/
static inline void PDT_Enable(PDT_Type * const base)
{
MODIFY_REG32(base->SC, PDT_SC_PDTEN_Msk, PDT_SC_PDTEN_Pos, true);
}
/*!
* @brief PDT Disable.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @return none
*/
static inline void PDT_Disable(PDT_Type * const base)
{
MODIFY_REG32(base->SC, PDT_SC_PDTEN_Msk, PDT_SC_PDTEN_Pos, false);
}
/*!
* @brief Set PDT SoftTrigger Cmd.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @return none
*/
static inline void PDT_SoftTriggerCmd(PDT_Type * const base)
{
MODIFY_REG32(base->SC, PDT_SC_SWTRIG_Msk, PDT_SC_SWTRIG_Pos, true);
}
/*!
* @brief Set PDT trigger input source.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] source: PDT trigger input source
* - PDT_HARDWARE_TRIGGER
* - PDT_SOFTWARE_TRIGGER
* @return none
*/
static inline void PDT_SetTriggerSource(PDT_Type * const base, pdt_trigger_src_t source)
{
MODIFY_REG32(base->SC, PDT_SC_TRGSEL_Msk, PDT_SC_TRGSEL_Pos, source);
}
/*!
* @brief Set PDT Trigger delay bypass Enable.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] state: bypass enable
* - true
* - false
* @return none
*/
static inline void PDT_SetTriggerDelayBypass(PDT_Type * const base, bool state)
{
MODIFY_REG32(base->SC, PDT_SC_Bypass_En_Msk, PDT_SC_Bypass_En_Pos, state);
}
/*!
* @brief Set PDT Timer Modulus Value.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] value: mod value
* @return none
*/
static inline void PDT_SetTimerModulusValue(PDT_Type * const base, uint16_t value)
{
MODIFY_REG32(base->MOD, PDT_MOD_MOD_Msk, PDT_MOD_MOD_Pos, value);
}
/*!
* @brief Set PDT trigger Delay Value.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] chn: delay channel(0~7)
* @param[in] value: trigger delay value
* @return none
*/
static inline void PDT_SetTriggerDelayValue(PDT_Type * const base, uint8_t chn, uint16_t value)
{
MODIFY_REG32(base->DLY[chn].DLY, PDT_DLY0_DLY0_Msk, PDT_DLY0_DLY0_Pos, value);
}
/*!
* @brief Set PDT interrupt delay value.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] value: intrrupt delay value
* @return none
*/
static inline void PDT_SetValueForTimerInterrupt(PDT_Type * const base, uint16_t value)
{
MODIFY_REG32(base->IDLY, PDT_IDLY_IDLY_Msk, PDT_IDLY_IDLY_Pos, value);
}
/*!
* @brief Set PDT trigger delay enable.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] dlyEnable: all 8 channel dly enable mask
* @return none
*/
static inline void PDT_SetTriggerDelayEnable(PDT_Type * const base, uint8_t dlyEnable)
{
MODIFY_REG32(base->DLYn_EN, PDT_DLY_EN_Msk, PDT_DLYn_EN_DLY0_En_Pos, dlyEnable);
}
/*!
* @brief Set PDT pulse-out enable.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @param[in] state: pulse-out enable
* - true
* - false
* @return none
*/
static inline void PDT_SetCmpPulseOutEnable(PDT_Type * const base, bool state)
{
MODIFY_REG32(base->POEN, PDT_POEN_POEN_Msk, PDT_POEN_POEN_Pos, state);
}
/*!
* @brief Set PDT pulse-out delay value for goes high.
*
* @param[in] base: PDT module
* - PDT0
* - PDT1
* @param[in] value: delay value for goes high
* @return none
*/
static inline void PDT_SetCmpPulseOutDelayForHigh(PDT_Type *base, uint16_t value)
{
base->PULSE.ACCESS16BIT.DLY1 = value;
}
/*!
* @brief Set PDT pulse-out delay value for goes low.
*
* @param[in] base: PDT module
* - PDT0
* - PDT1
* @param[in] value: delay value for goes low
* @return none
*/
static inline void PDT_SetCmpPulseOutDelayForLow(PDT_Type *base, uint16_t value)
{
base->PULSE.ACCESS16BIT.DLY2 = value;
}
/*!
* @brief Get timer value.
*
* @param[in] base: the PDT base address
* - PDT0
* - PDT1
* @return timer counting value
*/
#define PDT_GetTimerValue(base) (READ_BIT32((base)->CNT, PDT_CNT_CNT_Msk) >> PDT_CNT_CNT_Pos)
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* PDT_HW_H */
/* ============================================= EOF ============================================== */
Reference in New Issue View Git Blame Copy Permalink